Berkel 705 Service Manual download pdf (Page 34)

6. Press 2 clutch assemblies about .06″ using the arbor press and a pin of large enough diameter to completely

cover gear teeth. This will break them loose from the outer bearings that are sealed with Loctite No. 290.

7. Break loose the 2 dowel pins (2275-4221), using a punch slightly smaller than the diameter of the pins.

CAUTION

If you use a punch considerably smaller than the correct diameter, you will

distort the pins and they cannot be reused.

S6151-DL-MMM-010

1-22

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 51 52

No comments

Berkel 705 Service Manual Page 34