Berkel 919E Operations Instructions download pdf (Page 20)

18 • 909E & 919E OWNER/OPERATOR MANUAL

OPTIONAL ACCESSORIES

VEGETABLE CHUTE (4975-00370)

A vegetable chute is available to replace the slicing table. To install the vegetable chute, loosen the slicing

table locking knob and remove the slicing table. Loosen the locking knob (2275-00042) on the vegetable

chute and fit it to the machine the same way as the slicing table. Tighten locking knob. Before operating,

check to see that there is approximately

" clearance between the end of the vegetable chute and the

gauge plate with the index knob set at “0.”

The vegetable chute is used for quantity slicing of various size fruit, meats or vegetables.

PRODUCT FENCE (4975-0004) & SKEWER ASSEMBLY (4975-00005)

The fence and product skewer are designed to fit on the upper edge of the slicing table.

To attach the product skewer and fence, loosen the locking knob. Position the slot in the end casting so

it can be slipped up and over the lip at the front upper edge of the slicing table. Position the fence and

product skewer so there is enough space for the product to slide down easily. Tighten locking knobs.

Supplied with each skewer assembly is a coring tool. This tool is used to cut a hole through the core of

the product before inserting the product skewer.

The product fence and skewer assemblies are used for uniform crosscut on tomatoes, onions, peppers and

similar round products.

TRAYS

RECEIVING TRAY (3875-00059)

The receiving tray is a shallow-lipped tray to receive the product and hold small quantities of juices (hot

beef, tomatoes, etc.) The tray is contour molded to the receiving area of the machine to hold it steady

during operation.

SLAW TRAY (3875-00031)

The slaw tray is a deep tray to receive a large quantity of product and retain the juices.

Both the receiving and slaw trays are made of heavy duty plastic that meet standards for sanitation and

are machine washable.

JUICE CUP (3875-00001)

The juice cup is designed to fit onto the back lip at the receiving area of the slicer where it will catch the

juice (tomatoes, for example) while allowing the product to drop freely on the receiving area.

1 2 ... 15 16 17 18 19 20 21 22 23

No comments

Berkel 919E Operations Instructions Page 20